HP Printer Common Issues
Easy Steps to Fix 5 Common Printing Issues in HP Printer
HP is known for world-class printing products, their machines are impeccably useful and amazing technology with great affordability. Though like any, other machine HP printers also need proper care and maintenance for unwavering performance. Some of the issues are common in types of machines that could be resolved without knowledge of advanced technology. First of all, just check that your printer is connected to power supply and paper tray is in proper condition. Also, replace the ink or toner if finished. If the issue still persist then just contact to HP Printer Support Phone Number to get the appropriate solution of your issue.
Common Errors in HP printers and their Solutions:-
1) Print and Scan Errors- There is a wide range of printing and scanning errors generated due to several causes. It becomes quite difficult to access the problem.
Potential Solution:-
HP is aware of the hitches on their devices and they have come up with an optimum solution for all printing and scanning issues. One such tool is HP Print and Scan Doctor; it is very handy tools that quickly accesses all issues and troubleshoot them in real time. This is only available for Windows.
2) Paper Jams- Paper jams may occur due to a skewed sheet or once in a while is a no big issue, but if paper jam is occurring a lot of times, your machine may need an attention.
Potential Solutions:-
- Turn the printer off and on again.
- Make sure that the printer rests on a flat surface to keep the alignment correct.
- Clear the jam from the printer by lifting the rear access door.
- Reset the printer.
- Check for overloading of paper in the tray
- Remove any torn, damp or wrinkled paper.
- Check the access door if it's not closed properly.
- Check if the tray has the same type of paper in the tray.
- Clear any obstruction that is blocking the paper path.
- If the problem persists proceed to service the Printer.
3) Print Jobs Stuck in Print Queue:-
This error is common if a print job is stuck in the Windows print queue, your printer is not able to print from a computer. This becomes more annoying when you cannot cancel or delete it causing stuck in the print job.
Potential Solutions:-
This issue can occur due to power failure, or a variety of reasons. You can talk to an HP expert on HP support center to resolve this issue or follow this number 1-800-826-8095 which is toll free.
4) 50.4 Error:-
This error is particularly related to Laser printers. It happens with a replaceable component called fuser. If you are certain about this error, do as follows.
Potential Solution:-
This part is a consumable part and needs replacement several times over the life of the printer depending on other factors as well. Replacing the fuser is the best solution to this. Just try to reboot the device, at times it works for some more pages.
5) Prints are not proper:- At times your device may function properly but you end up getting a poor quality image or faded printings.
Potential Solutions:-
- For laser printers, adjust the fuser as per the paper type.
- Check your print driver to ensure that you have the correct paper or media selected.
- Check for the paper loaded in the tray matches the type selected in the printer driver.
- Check out your toner cartridges, an imaging unit(s) and the fuser for damage.
Conclusion:-
These are some easy and quick fixes to give you an unwavering printing experience. If you have some critical errors, just take the help of the HP support center by dialing it number which is mentioned above and avoid further damage of your device. Here you get the appropriate solution of your problem in least of time. The assistance and help gathering of HP makes you get fix of your issue viably. Author is an expert of HP Printer; go here for more interesting information.